The Evaluation Board for ARM from Hitex has everything on-Board to develop your first ARM project:

• STR912FAW44x microcontroller in LQFP128 package with
  
  • 32 Bit ARM 966 CPU @ 96MHz
  • 512kByte + 32kByte Flash memory
  • 96kByte SRAM
  • 10/100 Ethernet MAC
  • USB2.0 full speed device
  • CAN 2.0B interface
  • 8/16 Bit external memory interface
  • 80 I/O pins
  • Timers and other peripherals

• Support for internal 512+32kByte FLASH and 96kByte SRAM
• Support of 1 10/100 Ethernet port
• Support of 1 USB-B portBuy online
• Support of 1 RS232 port
• Support of 1 I2C temperature sensor LM75
• 2 x small 7-segment LEDs attached to port pins
• Footprint for LCD connector (connected to SPI interface)
• 1 Potentiometer for AD input
• 6 buttons for reset, IRQ and port pins
• 32,768kHz and 25MHz Quartz
• Wire-wrap pins for 64 microcontroller IO ports (without Ethernet pins)
• Configuration of ports, reset, etc. via jumpers
• JTAG debugger support with JTAG connector
• Trace port support with Mictor connector footprint
• IMC connector (Inductive Motor Controller connector - see App-Notes from ST)
• Free wire-wrap area
• External power connector for 7-9V / 200mA
• 4 layer PCB, size 100x110mm in color "Hitex Red"